Using a Magnetic Catch Cup?
Now you can fill the shaker cup safely, without covering the plunger top with coffee and know that it won’t fall off the grinder base.
When using a KafaTek SDRM or MC6 grinder, grinding coffee into a shaker cup can be a bit tricky. The cup is positioned directly under the spout, which unfortunately also places it right over the plunger plug, causing ground coffee to scatter everywhere. You might be tempted to pull the cup forward to avoid this mess, but that risks it tipping and falling. Here's the perfect solution: our innovative mat features 9 large 12mm embedded magnets that securely hold the cup in place, even as it hangs over the edge!
Designed to be both flexible and robust, the mat easily curves to fit right onto the grinder’s base—no need to disassemble anything. Plus, it comes with a small rubber bumper that protects the catch cup from any scratches caused by the grinder’s crossbar. Elevate your coffee grinding experience with this essential accessory!
A Special Note for MC6 owners:
BTW, if you received your MC6 grinder after April 2026, the mats for the SDRM and MC6 grinders are identical. However, if your MC6 was delivered before spring 2026, the purge button is about 3mm closer to the power button, and we need to know which grinder you have.
Please measure the distance from the edge of the ring around the power button to the top of the purge button ring. If it's about 45mm, you have the first version of the grinder base. If it’s closer to 48mm, it’s the current version.
Here is a photo of our older MC6, which has a spacing of about 45mm. Let us know what version you have so we can make sure you receive the correct mat.